Cooling Tonnage from kW Calculator
Calculate cooling tonnage from kw with transparent engineering inputs and the displayed formula.
Run deterministic checks for missing or mixed units, physical bounds, detectable out-of-range values and formula applicability. This is not an engineering approval or a complete code/compliance check.
Export the current calculation inputs and outputs with formula, assumptions, confirmed source credits, automated verification status, tool version and timestamp.
PROFENG Pro unlocks calculation-record exports. The calculation itself remains free.
PROFENG provides this tool for engineering screening and educational use. Check the calculation basis, units, physical assumptions, applicable standards, safety factors, equipment data and project-specific requirements before design, procurement or operation.
Turn this result into a calculation record
Carry the tool context into the PROFENG calculation-check and record workspace without implying certification or engineering approval.
Why use this cooling tonnage from kw calculator?
Calculate cooling tonnage from kw with transparent engineering inputs and the displayed formula. The displayed relationship is TR = kW / 3.51685284.
What this calculation does
This calculator determines cooling capacity from cooling load. Use it for HVAC and building-services screening with transparent air, thermal or flow assumptions.
Formula and engineering variables
TR = kW / 3.51685284
| Variable | Definition | Unit | Working guidance |
|---|---|---|---|
load | Cooling load | kW | Illustrative screening band: 0 to about 351.685 kW. This is not a design limit. |
Ranges above are screening guidance or physical bounds where stated. They are not code limits or manufacturer ratings.
Calculated outputs
- Cooling capacity (tons refrigeration): load/3.51685284
Worked example
- Cooling load (load) = 35.1685 kW
(35.1685)/3.51685284 = 10 tons refrigerationCooling capacity: 10 tons refrigerationAssumptions
- Air or fluid properties are represented by the entered values.
- The calculation represents steady operation unless the formula explicitly includes time.
- Room, duct or envelope geometry is idealized by the displayed relationship.
Limitations
- Detailed load calculations, diversity, controls, equipment curves, psychrometric state changes and local code requirements may require additional analysis.
- Final equipment selection should use manufacturer data and the applicable HVAC design method.
- This is a capacity-unit conversion and does not account for equipment efficiency, COP or part-load performance.
- The displayed default values are a worked example only; replace them with traceable project or measurement data.
Formula source and acknowledgement
Source being confirmed. PROFENG has not yet approved a published source for this exact implementation, so no candidate book, paper or standard is displayed here.
Limits of use for this relationship
- This is a capacity-unit conversion and does not account for equipment efficiency, COP or part-load performance.
Read the PROFENG methodology for formula sourcing and automated checks →
How to use it
Start with the inputs shown above, review the assumptions or options, then generate the result. Where the tool creates a file, keep the original until you have opened and checked the downloaded output.
Frequently asked questions
What does Cooling Tonnage from kW Calculator calculate?
This calculator determines cooling capacity from cooling load. Use it for HVAC and building-services screening with transparent air, thermal or flow assumptions.
What formula does Cooling Tonnage from kW Calculator use?
The calculator uses TR = kW / 3.51685284. Every input used by the implementation is listed in the variable table on this page.
How is the worked example for Cooling Tonnage from kW Calculator checked?
PROFENG substitutes the displayed default values into the implemented relationship and compares the result against automated verification cases where an independent verifier is available.
What assumptions matter most for Cooling Tonnage from kW Calculator?
Air or fluid properties are represented by the entered values. The calculation represents steady operation unless the formula explicitly includes time. Room, duct or envelope geometry is idealized by the displayed relationship.
Can I use this result for final design or procurement?
Use it as an engineering screening calculation. Final design, procurement, operation or compliance decisions require project-specific data and the applicable engineering method, standard or manufacturer information.
QA, changelog and corrections
Last QA update: 30 September 2026.
Automated verification passed – 30 September 2026 – six numerical cases checked, with dimensional checks, independent cross-checks for calculators, and unit round-trip checks for converters where applicable.
Changelog
30 September 2026 – source/indexation status, metadata and correction pathway reviewed. Engineering tools display the automated verification label only when they are inside the passing Part 3 verification scope.